Innovenergy_trunk/doc/controller_tests/ForcedEOC-OptimizeSelf-Consumption(discharging).md

# Forced EOC -> Optimize Self-Consumption (discharging)

Initial State: Forced EOC
Target State: Optimize Self-Consumption

Test Procedure

1. SOC should be 98% or below
2. A production deficit is simulated by setting the Grid setpoint to a negative value: -2000W
3. The system is brought to the Forced EOC state using Force charge now in the gui.
4. Wait until the system changes to Optimize Self-Consumption

Expected Outcome

• The system charges the battery to EOC in the Forced EOC state.
• charging power decreases as SOC approaches 100%
• the system changes into Optimize Self-Consumption
• the system discharges with 2000W +-100W
• Time to forced full charge displayed on the gui 6d 18h +-1h

Tested Outcome

The system reacted as expected and switched to Optimize Self-Consumption when the battery is fully charged and having
100% SOC. The system is excessively discharging with a power of ~2350W. Time to forced full charge is correctly displayed.